Heated vs regular LED light bars, a USA buyer guide

Which light bar stays clear in a Midwest or Northeast winter, which size fits your truck, and what the certification markings mean. The Northern Light Bars team. Updated November 2026.

Shop heated light bars

Why a heated light bar?

If you plow snow, run a utility fleet in the Midwest or Northeast, or drive through heavy winter weather, a regular LED light bar can let you down. Below freezing, moisture on the lens turns to ice and plowed snow sticks to the housing, so less light reaches the road.

This guide answers the three questions buyers ask us most: when you need the heater, which bar size fits which truck, and what certification means for road use.

How the heated lens works

Heated NightDriver LED light bars have a heating function built into the light. An internal temperature sensor turns the heating on automatically when the light’s internal temperature is at or below 20°C (68°F), reduces it at 30°C (86°F) and stops it at 40°C (104°F).

No extra wiring or switch is needed. The lens stays clearer in blowing snow, sleet and freezing rain.

When do you actually need the heater?

Choose a heated bar if you plow commercially, run utility or service work in winter, or regularly drive in snow, sleet or freezing rain between November and April.

A regular bar is usually enough if you only use it off-road on dry nights or for summer recreation.

Shop heated light bars

Which bar size fits which truck?

Always measure the mounting area and compare it with the dimensions on the product page before you order.

Half-ton pickups

Ford F-150, RAM 1500, Chevy Silverado 1500: the 12" Heated NightDriver, or a pair of 6" lights for compact mounts.

Shop the 12"

Heavy-duty pickups

F-250/F-350, RAM 2500/3500, Silverado 2500/3500: the 20" Heated NightDriver on the bumper or push bar.

Shop the 20"

Dedicated plow trucks

A 20" on the truck plus a 12" or a pair of 6" lights where space is tight.

Shop the 6" pair

Plow headlights

The Heated SAE/DOT Snow Plow Light Kit (NRH-SPSH) with high and low beam, DRL and signal light.

Shop the kit

Certification and road use

The Heated NightDriver light bars are ECE E-Mark certified with an ECE R112 auxiliary driving beam. The Heated Snow Plow Light Kit (NRH-SPSH) is SAE/DOT compliant, with high and low beam, daytime running light and signal light functions.

Road-use rules for auxiliary lights vary by state, so check local regulations for your installation. The certification is listed on every product page.

Shop SAE/DOT LED lights

Our heated light bars

Ships from U.S. inventory. 2-year warranty.

Heated light bar FAQ

If you drive or plow in regular snowfall below freezing, yes. The heating function helps keep snow and ice from building up on the lens during a storm.

The heating function is built into the light and runs only when the light is on and its internal temperature is low. Total draw at 12V is listed per model: 10.0A for the 20", 6.0A for the 12" and 3.0A per light for the 6".

No. The heating function is built into the Heated NightDriver light at the factory.

2 years, plus a 30-day money-back guarantee.

The Heated NightDriver bars carry an ECE R112 auxiliary driving beam, and rules for auxiliary lights vary by state. If you need SAE/DOT-designated lighting for road use, see the SAE/DOT LED Lights collection.

A 20" Heated NightDriver on the truck, plus a pair of 6" heated lights where space is tight. For the plow headlights, the Heated Snow Plow Light Kit (NRH-SPSH).